Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Pathfinder radar display won't illuminate when turned on
07-16-19, 04:35 PM (This post was last modified: 07-16-19 04:38 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Pathfinder radar display won't illuminate when turned on
Welcome to the Raymarine Forum Ron,

Q1) Appears display screen won't illuminate when turned on for night use.
A1) Please note that the Night palette setting will typically prevent the display's screen from being viewed in sunlight. The display's palette should be configured to to the Day palette when operating in daylight.

Q2) I want to know. Is it easy to replace a lighting element in radar display unit?
A2) Support for rendering repairs to the internal circuitry of Raymarine products is not supported. Such repairs would have been recommended to be performed by Raymarine's Product Repair Center. Unfortunately, parts and service for hsb/hsb2/SL Pathfinder Series Radar, Chartplotter, and Fishfinder Displays are no longer available from Raymarine. Accordingly and should the display's backlighting circuitry have suffered a failure, it would then be necessary to locate a hsb/hsb2/SL Pathfinder Series Radar Display within the second hand market or to upgrade the system. While Raymarine's Product Repair Center can no longer service these MFDs, Seawire Marine ((305) 489-1600) may be able to assist you with repairs to this legacy radar display.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Pathfinder radar display won't illuminate when turned on - Chuck - Raymarine - Moderator - 07-16-19 04:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)