No radar video on E120
|
06-06-16, 01:51 PM
(This post was last modified: 06-06-16 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: No radar video on E120
Welcome to the Raymarine Forum Garry,
The symptom is indicative of a failure within the radome or open array pedestals circuitry. Does the radar cable feature white sheathing or a black sheathing? Should the radar cable be black, then it would indicate that the radome or open array pedestal features an Ethernet communications/video interface and should be sent to Raymarine’s Product Repair Center to be serviced. However, should the radar cable be white, then it would indicate that the radome or open array pedestal features an analog video interface, requiring that the radome or open array pedestal and the cable be replaced as Raymarine's Product Repair Center can no longer service these radar devices. Fortunately, the E-Series Classic MFDs are compatible with any of Raymarine's currently manufactured radomes and open array pedestals except for Quantum radomes. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
No radar video on E120 - Garry - 06-06-16, 12:57 PM
RE: No radar video on E120 - Chuck - Raymarine - Moderator - 06-06-16 01:51 PM
RE: No radar video on E120 - Garry - 06-07-16, 11:39 AM
RE: No radar video on E120 - Chuck - Raymarine - Moderator - 06-07-16, 01:30 PM
|
User(s) browsing this thread: 1 Guest(s)