Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Adding a Raymarine display via NEMA 0183

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adding a Raymarine display via NEMA 0183
08-05-19, 01:10 PM (This post was last modified: 08-05-19 01:21 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Adding a Raymarine display via NEMA 0183
Welcome to the Raymarine Forum lwilson,

Please note that Raymarine equipment is not designed be interfaced to third party systems to support sharing of cartography, or radar/fishfinder features with such systems. This is particularly true with respect to controlling/configuring the features of third party radar and fishfinding systems. At best, the VGA output of the standard horizon CP590 system may be encoded and then repeated via the Raymarine MFD's Camera application. NMEA 0183 communications between your equipment and a Raymarine MFD would only support transmission of alphanumeric GPS, instrument (depth, wind, etc.), and navigational data (associated with a Go To or Follow Route command), between these systems.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Adding a Raymarine display via NEMA 0183 - Chuck - Raymarine - Moderator - 08-05-19 01:10 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication