[LW] [LW11] Proposal new functions in LH3

[Stefan]

Hi
There are a few improvements that would be quite easy to add to the LH3.

1. Since introduction of the sailing functions in LH3.9 its important to show as a minimum the polar target speed in knots and % and be able to show it as overlay on the maps. Maybe its there but I cant find it. Can the target speed and % also be sent via N2k to a P70s instrument?

2. Why cant I show my boats real size on the screen? I would like to put in boat length, bow to MFD (GPS), MFD (GPS) offset to centerline etc. This would give a more precise navigation. If you need inspiration how to do it have a look how its done in OpenCPN. Open Source sw that its free to download.

3. How do I get the track on the screen automatic? Have not find any selection for that. I want to have a selection to do this automatic without manual work. In LH3.10 manual chapter 7.3 its described how to do it manually.

4. When showing time on the screen as an overlay, it would be good to also have alternative time format without seconds i.e. hh:mm.

5. I have a MOB button connected to my Nexus NX2 system, this works great inside my Nexus units. Do Raymarine have any unit that can detect a 12V signal as MOB and send it further into N2k/STNG so it can be presented on my Axiom MDF? Or do I have to purchase a Yacht Device YDAB-01 to solve this?