The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] e7 MFD screen gone red

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] e7 MFD screen gone red
08-21-19, 03:19 AM (This post was last modified: 08-22-19 03:55 AM by Louise - Raymarine - Moderator.)
Post: #1
Marco@onyva Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2018
Reputation: 0
[LW11] e7 MFD screen gone red
When I was sailing last week, I noticed a red glow on my e7 MFD, but initially thought it was my new sunglasses. They glow got worse though and I noticed that the background of the screen had gone orangy-red. The unit worked correctly though. Also on the chart, everything that would be normally black (i.e. vector lines, depth, etc) was now red. Restarted the unit, also with the power off at the panel first, nothing......

Is this a sign the screen is dying? Seems rather quick after 5 years.

I did notice in diagnostics the "system voltage" was 11,4 (and some other values of 11, something), which I do not know is normal? As the svs batteries were full and the boat voltage read 12,9V on the Victron battery monitor.

Any idea or suggestions are welcome. Thank you!

Marco
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] e7 MFD screen gone red - Marco@onyva - 08-21-19 03:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication