[JH11] MFD says no Pilot connected

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[JH] [JH11] MFD says no Pilot connected

09-03-19, 08:46 PM (This post was last modified: 09-04-19 11:39 AM by John - Raymarine - Moderator.)

Post: #1

Garth

Junior Member

Posts: 1
Joined: Jun 2019
Reputation: 0

[JH11] MFD says no Pilot connected

Just upgraded to the latest software version as of today.
MFD reported Success.
The system is standard factory installed by Riviera in 2015
E125 MFD, PR70R networked via Volvo EVC to IPS600 pods.
The boat will steer to a vector set on the PR70R and the EVC shows rudder angle but the E125 shows No Pilot and when selecting a course the PR70R reports error, not connected.

What needs to be done/checked?

« Next Oldest | Next Newest »

Messages In This Thread

[JH11] MFD says no Pilot connected - Garth - 09-03-19 08:46 PM

RE: [JH11] MFD says no Pilot connected - John - Raymarine - Moderator - 09-04-19, 11:44 AM

User(s) browsing this thread: 1 Guest(s)