[CA] [CA11] Depth Sounder shows 0.0 then ---
|
09-19-19, 08:45 AM
Post: #3
|
|||
|
|||
RE: [CA11] Depth Sounder shows 0.0 then ---
Thanks Chuck.
The display is the E22057, I have three of them, 2 at the helm and one at the chart table along with the ST290 Wind display. It is one of the E22057 displays that I replaced. Everything else displays just fine, except the auto helm will not work with out the speed and also True Wind speed, which is expected. The paddle wheel is free of any weed and growth etc, I check it regularly and it is only in the water when we are sailing. I have also tried a replacement and it gave the same result so it looks as if the pod maybe the culprit here. I may have a spare but will get them checked by my dealer if I have no joy. Appreciate the response, this is a great resource, thanks again. Andy |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Depth Sounder shows 0.0 then --- - AndyKirby - 09-18-19, 02:59 PM
RE: [CA11] Depth Sounder shows 0.0 then --- - Chuck - Raymarine - Moderator - 09-18-19, 03:32 PM
RE: [CA11] Depth Sounder shows 0.0 then --- - AndyKirby - 09-19-19 08:45 AM
RE: [CA11] Depth Sounder shows 0.0 then --- - Chuck - Raymarine - Moderator - 09-19-19, 09:02 AM
RE: [CA11] Depth Sounder shows 0.0 then --- - AndyKirby - 09-30-19, 03:09 PM
RE: [CA11] Depth Sounder shows 0.0 then --- - Chuck - Raymarine - Moderator - 10-07-19, 09:49 AM
|
User(s) browsing this thread: 2 Guest(s)