Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Failure i50 Tridata

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Failure i50 Tridata
09-22-19, 08:56 AM (This post was last modified: 09-23-19 09:30 AM by Derek - Raymarine - Moderator.)
Post: #14
Ottogerd Offline
Junior Member
**
 		Posts: 9
Joined: Sep 2019
Reputation: 0
RE: [DG11] Failure i50 Tridata
You told me not to shorten the cable. Sorry, but I do not understand this.

I want it to do in this way.

1.Cut the cable just behind the old transducer
2. Connect the cable of the new transducer to the cable of the old transducer which goes to the Tridata.

Does it mean I leave the cable of the new transducer long as it is and make the connection to the old cable to the transducer.

That means the whole cable has nearly the double length.

I add a drawing. Correct ?

Thank you in advance for replying.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Failure i50 Tridata - Ottogerd - 09-09-19, 07:45 AM
RE: [DG11] Failure i50 Tridata - Ottogerd - 09-22-19 08:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication