The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Integrating i50/i60 with older EClassic - ST6002System

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Integrating i50/i60 with older EClassic - ST6002System
10-01-19, 04:48 PM (This post was last modified: 10-02-19 02:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
tday01 Offline
Junior Member
**
 		Posts: 4
Joined: Sep 2019
Reputation: 0
[CA11] Integrating i50/i60 with older EClassic - ST6002System
The wind transducer on my E120 - ST60 ST6002 system has just failed.

I am not ready for a complete upgrade, but noticed that there is currently
a great deal on a wind / depth / speed i50 / i60 package.

I have some integration questions:
It appears that I can connect the i50/ i60 equipment to the Seatalk network via a Seatalk to SeatalkNG adaptor kit.
1. If I do this, will I be able to calibrate the i50/i60s with the existing equipment?
2. Is the wind transducer a direct replacement for the old one? i.e. Will it just screw into the fitting at the top of the mast? If not, can I reuse the cable in the mast?
3. Can I reuse the old depth transducer until I pull the boat to install the new one?

Many thanks

Tony
SV Alcyone
Hylas 54
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Integrating i50/i60 with older EClassic - ST6002System - tday01 - 10-01-19 04:48 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication