Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Feedback from a/c/e/gs series owners on LH3 performance

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Feedback from a/c/e/gs series owners on LH3 performance
10-07-19, 02:57 PM (This post was last modified: 10-07-19 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Feedback from a/c/e/gs series owners on LH3 performance
Welcome back to the Raymarine Forum KW_84,

Please note of the MFDs which you have listed, a-Series, c-Series, and e-Series MFDs cannot run and will not be permitted to install LightHouse 3 software. LightHouse 3 software may only be installed into Axiom / Axiom Pro / Axiom XL MFDs, eS-Series MFDs, and gS-Series MFDs. Installation of LightHouse 3 software within eS/gS-Series MFDs is typically recommended only within within systems which additionally feature Axiom/Axiom Pro/Axiom XL MFDs. Please additionally note that while LightHouse 3 software will continue to evolve for Axiom / Axiom Pro / Axiom XL MFDs, the last version of LightHouse 3 software which may be used within eS/gS-Series MFDs will likely be LightHouse 3 v3.11.x.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Feedback from a/c/e/gs series owners on LH3 performance - Chuck - Raymarine - Moderator - 10-07-19 02:57 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication