Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] A57D external alarm capability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A57D external alarm capability
10-14-19, 11:23 AM (This post was last modified: 10-14-19 01:18 PM by Chuck - Raymarine - Moderator.)
Post: #11
bucky Offline
Junior Member
**
 		Posts: 23
Joined: Mar 2018
Reputation: 0
RE: [CA11] A57D external alarm capability
thanks again chuck

will the st70 display its current software version? looks like i need v3.04

when i upgraded the software on the e125 recently, it was on the bench, st70 not connected. do i need to re-install software with st70 in network?

if i am able to upgrade st70 saftware can i swap st70 into my second network with A57D as master mfd? (i own 2 st70s)

i guessing updating the st70 in the A57D network is more difficult the the e125 network.

does pod need software upgrade?

really appreciate your help with my older equipment
bucky
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] A57D external alarm capability - bucky - 10-14-19 11:23 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication