Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] SmartController not connecting to the SeaTalkng network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SmartController not connecting to the SeaTalkng network
10-21-19, 02:10 PM (This post was last modified: 10-21-19 02:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] SmartController not connecting to the SeaTalkng network
Welcome to the Raymarine Forum

A SeaTalk to SeaTalkng Adapter Cable and SeaTalkng 5-Way Connector cannot be used for the purpose which you have employed. Please click here to view a FAQ addressing the what differentiates a SeaTalk to SeaTalkng Converter from SeaTalkng to SeaTalk Adapter Cable. In this case the base station must be interfaced to the SeaTalk (yellow) socket of a SeaTalk to SeaTalkng Converter which has been installed as a backbone component within the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] SmartController not connecting to the SeaTalkng network - Chuck - Raymarine - Moderator - 10-21-19 02:10 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication