[CA] [CA11] No AIS

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum captedl99,

Please click here to view a FAQ addressing this subject. The AIS650 should not be simultaneously powered be the vessel and connected via USB to a PC which is in turn being powered by an AC/DC power supply. Failure to heed this recommendation may result in a ground loop which may result in communications issues and/or damage to the AIS650 and/or PC. Should the MFD's diagnostics feature detect other devices with have been interfaced to the system's powered and properly terminated SeaTalkng/NMEA 2000 backbone, then it would appear that the AIS650's SeaTalkng/NMEA 2000 communications interface has suffered a failure, necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced. Alternatively, you may want to consider disconnecting the AIS650 from the SeaTalkng/NMEA 2000 backbone and instead interface the 38400 BAUD leads NMEA 0183 of the AIS650 to the NMEA 0183 Port 1 leads of the e127 MFD's Power/NMEA 0183/Video Input Cable.