The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] SeaTalk hs switch with axiom pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SeaTalk hs switch with axiom pro
12-04-19, 05:45 PM (This post was last modified: 12-05-19 10:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
Never II Nauti Offline
Junior Member
**
 		Posts: 17
Joined: Dec 2019
Reputation: 0
[CA11] SeaTalk hs switch with axiom pro
Needing to confirm some research I have completed. I am replacing 2 E120s and 1 E80 that are networked thru the SeaTalk hs switch E55058 with 3 axiom pros. As I understand I can use the SeaTalk hs in place and connect to each of the 3 axioms via an adapter A80160 and would not have a need for a backbone as a magnum radar and weather unit would go thru the switch and my transducers would go to one of the axiom units. In addition, I understand that the sr100 is fully functional with the axiom pros. I appreciate your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SeaTalk hs switch with axiom pro - Never II Nauti - 12-04-19 05:45 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication