Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SeaTalk hs switch with axiom pro
12-16-19, 11:34 AM
Post: #6
RE: [CA11] SeaTalk hs switch with axiom pro
Never II Nauti,

A SeaTalk to SeaTalkng Converter would then be installed as a backbone component of the system's SeaTalkng / NMEA 2000 backbone. The currently installed Raystar 125 GPS Sensor's Cable would spliced to the SeaTalk to SeaTalkng Converter Cable supplied with the SeaTalk to SeaTalkng Converter Kit as follows:
- splice the red and green leads of the Raystar 125 GPS Sensor to the red lead of the SeaTalk to SeaTalkng Converter Cable
- splice the yellow lead of the Raystar 125 GPS Sensor to the yellow lead of the SeaTalk to SeaTalkng Converter Cable
- splice brown and black/bare leads of the Raystar 125 GPS Sensor to the black/bare lead of the SeaTalk to SeaTalkng Converter Cable

Then plug the SeaTalk to SeaTalkng Converter Cable into the yellow socket of the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] SeaTalk hs switch with axiom pro - Chuck - Raymarine - Moderator - 12-16-19 11:34 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)