Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Correct nmea0183 wind sentence for ST2000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Correct nmea0183 wind sentence for ST2000+
12-16-19, 02:59 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Correct nmea0183 wind sentence for ST2000+
Welcome to the Raymarine Forum Peter,

In the Forum thread which you had referenced, the NMEA 0183 wind source was being interfaced to the long retired E85001 PC/SeaTalk/NMEA 0183 Interface Module to which the autopilot was interfaced. As such, the PC/SeaTalk/NMEA 0183 Interface Module rather than the ST2000 was functioning as a NMEA 0183 to SeaTalk data bridge. In the absence of a PC/SeaTalk/NMEA 0183 Interface Module within your system (or third party SeaTalk to NMEA 0183 data bridging device), a product capable of transmitting the NMEA 0183 VWR sentence would be required.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Correct nmea0183 wind sentence for ST2000+ - Chuck - Raymarine - Moderator - 12-16-19 02:59 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication