Post Reply 
 
Thread Rating:
  • 2 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Intagration of the ClearCruise System
01-01-20, 09:02 PM
Post: #23
RE: [CA11] Intagration of the ClearCruise System
OK,.so I .....

1. Disconnect only the NG from the X30 pilot computer.
2. Disconnect the flux compass from the X30.
3. Connect the AR-200 unit NG.

Power up the system and check the network source settings to confirm that the heading source is set to AR-200 and also see if the GPS source is the AR-200 or the Axiom...

Jeff
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Intagration of the ClearCruise System - jefndeb - 01-01-20 09:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)