[CA] [CA11] 100 series autopilot vs SG
|
01-02-20, 10:01 PM
Post: #3
|
|||
|
|||
RE: [CA11] 100 series autopilot vs SG
Chuck,
I have started down the road toward a swap. But unfortunately, I really botched the original question. Let me try again. The Sabre 34 has an S1 (not an S3), which is not suitable for a Type 2 linear drive, from what I can tell. The S3 of course is suitable for the drive. Strike 1. The Saga has a Series 300, not a Series 100. I don't know the actual specs for the two units, but the service manual says the only difference is the Series 300 can drive a bigger actuator. Strike 2. I think that with the correct models, the verdict reverses. I should keep the S1 on the 12,000 pound Sabre 34 with the wheel pilot, and the Series 300 on the 22,000 pound Saga 43 with the Type 2 Long linear drive (and not swap units). Do you concur? Another question -- the Saga has a rate gyro unit, an E12101, and I can't find the manual anywhere. Can you point me to where I can download it? Thanks. And sorry for the bad data. Harry |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] 100 series autopilot vs SG - sailingharry - 12-09-19, 05:44 PM
RE: [CA11] 100 series autopilot vs SG - Chuck - Raymarine - Moderator - 12-10-19, 10:41 AM
RE: [CA11] 100 series autopilot vs SG - Chuck - Raymarine - Moderator - 01-03-20, 09:13 AM
RE: [CA11] 100 series autopilot vs SG - sailingharry - 01-03-20, 09:40 AM
RE: [CA11] 100 series autopilot vs SG - Chuck - Raymarine - Moderator - 01-03-20, 12:00 PM
|
User(s) browsing this thread: 1 Guest(s)