The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Sounder modules
01-03-20, 01:23 AM (This post was last modified: 01-03-20 10:54 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Sounder modules
I recently needed to replace my 600 watt transducer on my system with an E80 mfd, using a DSM300. Upon recommendation of airmar I went with a 1000 watt B164 transducer because I generally fish depths over 900 feet. I do not seem to get any deeper readings with the new transducer than I did with 600 watt transducer. Would using a cp370 module enable me to see deeper levels or would it just give me better clarity? I previously upgraded to cp370 with my 600 watt transducer and was very pleased with its performance but unfortunately the unit was stolen and I had to revert back to the DSM300 but if I could see deeper depths with the cp370 or another module with my 1000 watt transducer I would consider buying another.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Sounder modules - egavasm - 01-03-20 01:23 AM
RE: [CA11] Sounder modules - egavasm - 01-03-20, 03:33 PM
RE: [CA11] Sounder modules - egavasm - 01-04-20, 12:02 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)