[TG11] SeaTalk1 to NMEA 2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] SeaTalk1 to NMEA 2000

01-03-20, 06:41 PM (This post was last modified: 01-06-20 04:21 PM by Chuck - Raymarine - Moderator.)

Post: #1

nsmi

Junior Member

Posts: 5
Joined: Jan 2020
Reputation: 0

[TG11] SeaTalk1 to NMEA 2000

I'm a new owner of a 2005 Beneteau that has an existing Raymarine Seatalk1 Network.

All the instruments are running through the Seatalk1 Network, I would like to add a NEMA 2000 Network for two way communication adding a NEMA 2000 AIS transponder and a NMEA 2000 Ethernet Gateway to send all the data to an onboard router.

The router will have Internet and wired webcams connected on the local network and if I understand correctly I can then share the NEMA 2000 and SeaTalk1 data over the Router's Wifi to laptops and tablets?

Does the attached diagram look correct?

I'll need power for both the SeaTalk Converter and the NMEA 2000 Network?

Thanks, Neil

Attached File(s) Thumbnail(s)