[TG11] SeaTalk1 to NMEA 2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] SeaTalk1 to NMEA 2000

01-06-20, 04:59 PM

Post: #4

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] SeaTalk1 to NMEA 2000

Hello Neil,

Yes, assuming that you do get 0183 AIS data into the C80 via a multiplexer at a later date, that works fine. Just be aware that there is not (unfortunately) an STNG Backbone (blue) to Devicenet adaptor cable accessory available, so you'll need to cut/join a standard backbone cable with a standard Devicenet cable. The wire colours will be the same.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-03-20, 06:41 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-05-20, 05:29 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-06-20, 03:51 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-06-20 04:59 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-07-20, 09:03 AM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-07-20, 07:59 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-19-20, 06:46 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-20-20, 06:57 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-20-20, 07:17 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-21-20, 01:16 AM

User(s) browsing this thread: 4 Guest(s)