[CA] [CA11] Intagration of the ClearCruise System

[jefndeb]

Hey Chuck,

Update-

Referencing the latest schematic of my system (attached), I have another question as far as integration goes. I bought 2 ea i70 Multi displays (older version E70365) and thought I would replace the upper helm station ST60 Plus Wind and the ST60 Plus Tridata with these two multi displays....I see there are many different ways they can be interfaced and I've been thinking about how to connect them to the system.

With that in mind, I was trying to keep the P79 Depth transducer as a "stand alone" source of depth in order to have a backup/secondary depth source aside from the B744 that is connected to the Lower Helm Axiom 9..

Maybe installing my spare ST60 Plus depth with this P79 wired directly to it?
Not sure that is best...

I see I could remove the P79 from the ST60 Tridata and connect to the ITC-5 as an option as well.

I am also guessing if i did that I could still select my "source of depth" to be either the ITC-5 (P79) or the Axiom 9 (B744)

Any suggestions would be welcome.

Thanks,...Jeff