[TG11] SeaTalk1 to NMEA 2000

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] SeaTalk1 to NMEA 2000

01-19-20, 06:46 PM

Post: #7

nsmi

Junior Member

Posts: 5
Joined: Jan 2020
Reputation: 0

RE: [TG11] SeaTalk1 to NMEA 2000

Can I send the NMEA 0183 Data from the AIS receiver at 4800 Baud to the C80 connecting it through the NMEA 0183 input on the Autopilot?

Can I use Cat5e network cable to send the data or is there a better type of cable?

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-03-20, 06:41 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-05-20, 05:29 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-06-20, 03:51 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-06-20, 04:59 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-07-20, 09:03 AM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-07-20, 07:59 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-19-20 06:46 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-20-20, 06:57 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - nsmi - 01-20-20, 07:17 PM

RE: [TG11] SeaTalk1 to NMEA 2000 - Tom - Raymarine - Moderator - 01-21-20, 01:16 AM

User(s) browsing this thread: 6 Guest(s)