Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Intagration of the ClearCruise System

Post Reply 
 
Thread Rating:
  • 2 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Intagration of the ClearCruise System
01-21-20, 11:41 AM
Post: #28
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Intagration of the ClearCruise System
Jeff,

Q. Maybe installing my spare ST60 Plus depth with this P79 wired directly to it?
Not sure that is best... .I see I could remove the P79 from the ST60 Tridata and connect to the ITC-5 as an option as well. I am also guessing if i did that I could still select my "source of depth" to be either the ITC-5 (P79) or the Axiom 9 (B744).
A. Either of these options are equally valid and there is not particular advantage to either.

Add'l comment. We had last discussed testing the autopilot's ability to use heading data from the AR200 and specific tests had been suggested. Were these performed? What were the results?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Intagration of the ClearCruise System - Chuck - Raymarine - Moderator - 01-21-20 11:41 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication