Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Intagration of the ClearCruise System

Post Reply 
 
Thread Rating:
  • 2 Vote(s) - 2.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Intagration of the ClearCruise System
01-23-20, 09:38 AM
Post: #36
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Intagration of the ClearCruise System
Jeff,

Q1. I guess the bulk of the NEMA data would be on the backbone ?
A1. The format of data packet on the backbone is NMEA 2000 PGNs. The format of data packets on SeaTalk bus is SeaTalk proprietary packets. The format of data transmitted from an E85001's NMEA 0183 output port is 4800 BAUD NMEA 0183 sentences. To summarize, system data present on the backbone will be bridged to a Seatalk bus via the SeaTalk to SeaTalkng Converter. Should the E85001 be operational, then it bridge data from the SeaTalk bus to 4800 BAUD NMEA 0183 sentences. This is a completely plausible means to get data from your system via WiFi to a navigational application running on a computer or mobile device.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Intagration of the ClearCruise System - Chuck - Raymarine - Moderator - 01-23-20 09:38 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication