The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] SS264N With Axiom

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] SS264N With Axiom
02-05-20, 09:12 AM (This post was last modified: 02-05-20 01:21 PM by Chuck - Raymarine - Moderator.)
Post: #1
thumper Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2019
Reputation: 0
[CA11] SS264N With Axiom
I have two Axioms (12" and 9") and the RV-100 installed on my boat.

I am looking to add a flush mounted fixed frequency transducer with the best possible bottom discrimination in water depths less than 200'. It looks like the Airmar SS264N using the single 200khz transducer would be the most sensitive (lowest Q rating).

Is this transducer compatible with my equipment? Since this is a 1KW unit which sonar box would be best to add, the CP-370?

Or if you have a better option happy to hear it
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SS264N With Axiom - thumper - 02-05-20 09:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication