The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Raytheon Type 2S linear drive module failing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raytheon Type 2S linear drive module failing
02-11-20, 04:06 PM (This post was last modified: 02-11-20 04:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
roweronline Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2017
Reputation: 0
[CA11] Raytheon Type 2S linear drive module failing
Hello,

Several times, while under load, I have experienced autopilot errors that I believe to be attributed to a fault in our Raytheon Type 2S drive unit. The autopilot disengages and it appears to me that something within the the "linear drive module" (part 29 on the exploded view diagram) has unscrewed or unseated itself.

My attempts to repair this have not been successful. I have disassembled and reassembled the unit several times but the failure re-occurs under load.

The exploded parts diagram does not provide any detail on the linear drive module itself... is there a more detailed diagram of this module? Failing that are there any repair options? I welcome any suggestions.

Thanks in advance,

Peter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Raytheon Type 2S linear drive module failing - roweronline - 02-11-20 04:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication