[CA11] Is it possible to link axiom 9 ff with dv220 and b175

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Is it possible to link axiom 9 ff with dv220 and b175

02-14-20, 04:56 PM (This post was last modified: 02-18-20 10:10 AM by Chuck - Raymarine - Moderator.)

Post: #1

JammanJ Offline

Junior Member

Posts: 6
Joined: Aug 2019
Reputation: 0

[CA11] Is it possible to link axiom 9 ff with dv220 and b175

Hi, Hames here. Thanks for your advice. I have to throughhull dv220 transducers installed on my boat; because of limited positioning on bottom of boat a little to much disturbance doesn't allow for good bottom readings at speed.

Therefor i was thinking of installing a b175m transducer with 470 transducer module to improve preformance and depth range.

Was wondering with this setup if i could have both the 220 for side an down imaging run the same time as the b175?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Is it possible to link axiom 9 ff with dv220 and b175 - JammanJ - 02-14-20 04:56 PM

RE: [CA11] Is it possible to link axiom 9 ff with dv220 and b175 - Chuck - Raymarine - Moderator - 02-18-20, 10:16 AM

User(s) browsing this thread: 1 Guest(s)