[CA11] CP570 to 3KW Transducer Upgrade from 2KW

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] CP570 to 3KW Transducer Upgrade from 2KW

03-12-20, 02:26 PM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW

Welcome back to the Raymarine Forum Fish On,

Q. Will the CP570 work on an inhull R599LH 3kw to its fullest potential, or does it max out at 2kw, and I would be better off with the R111LH 2kw inhull transducer.
A. The CP570 will deliver up to 2kW per channel. As such, should a 3kW transducer be interfaced to the CP570, then the maximum output from either of its channels would be limited to 2kW.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-12-20, 02:05 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Chuck - Raymarine - Moderator - 03-12-20 02:26 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-12-20, 02:45 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Chuck - Raymarine - Moderator - 03-13-20, 09:21 AM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-13-20, 09:41 AM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Chuck - Raymarine - Moderator - 03-17-20, 02:56 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-17-20, 03:06 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Chuck - Raymarine - Moderator - 03-17-20, 04:01 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Fish On - 03-17-20, 04:41 PM

RE: [CA11] CP570 to 3KW Transducer Upgrade from 2KW - Chuck - Raymarine - Moderator - 03-18-20, 08:19 AM

User(s) browsing this thread: 1 Guest(s)