Raymarine forum / Raymarine Forums / Product Selection Assistance v / [CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
04-28-20, 10:47 AM (This post was last modified: 04-28-20 02:13 PM by Chuck - Raymarine - Moderator.)
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo
Brian,

Q. Is there a known cable gland to Raymarine that you recommend to use for passing these 2 cables through a deck or must I drill a new [censored] for the second cable?
A. Please click here to view a FAQ addressing this subject. As indicated therein, to eliminate the need to chase two cables, I generally recommend that those who will be seeking a wired connection to a Quantum / Quantum2 radome utilize a Digital Radar Cable (provides both power and Ethernet communications with the radome), as it would permit a single cable to be chased. Regarding cable glands, I would recommend searching the Internet for "marine bulkhead cable gland". Boat Outfitters appeared to have a Multi Deck Seal - Multiple Cables up to 0.71". Digital Radar Cables are approximately 0.5" in diameter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo - Chuck - Raymarine - Moderator - 04-28-20 10:47 AM

Forum Jump:


User(s) browsing this thread: 8 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication