[CA] [CA11] Quantum 2 Radar/AxiomPro/Older SG3 Raymarine Autopilo

[sv_atlas]

Chuck,

As always, thank you very much.

Another question, I need to mount my Raymarine CAM210 to the stainless mast on my transom. The included R32142 is too big to fit through the access holes of the 7’ mast. To your knowledge, is there a water tight coupler for RJ45 available that would fit inside a 7/8” opening (the mast is manufactured by Kato Marine and has a 7/8” access port)?

I suspect I will have to cut the cable on the CAM210 and splice in a longer cable but would prefer not to do that if there is a better solution.

Thanks in advance.

Brian