Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] 3 MFDs Through HS5 RayNet Network Switch?
04-29-20, 03:34 PM (This post was last modified: 04-29-20 03:48 PM by Chuck - Raymarine - Moderator.)
Post: #9
beast123 Offline
Junior Member
**
 		Posts: 9
Joined: Jan 2019
Reputation: 0
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch?
It appears that the two current MFDs are connected to a 5-Way SeaTalkng Connector.
Please see the detail in the pictures. The back of the e125 is shown and the switch and 5-Way SeaTalkng Connector etc. It looks like the e125 goes to the 5-Way SeaTalkng Connector and the rest are also connected there. do i need to rearrange this configuration?


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] 3 MFDs Through HS5 RayNet Network Switch? - beast123 - 04-29-20 03:34 PM

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication