[JB] Multiple Data Master Error

[Jules - Raymarine - Moderator]

Hi sgdunn,

Welcome to the forum,

As indicated in your photo with the Axiom 7 at the top of the networked devices - you need to press "Assign as datamaster" as shown on the pop-up. Alternatively, when you see the pop-up message to select a data master display you select the one you want.

This is described in the Operation manual for Lighthouse 3.11 at the bottom of this page https://www.raymarine.com/multifunction-...xiom7.html

Hope this helps

Happy boating

Kind regards
Jules