[TG11] ES128 will not accept LH3 software

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] ES128 will not accept LH3 software

05-17-20, 01:55 AM (This post was last modified: 05-20-20 01:49 AM by Tom - Raymarine - Moderator.)

Post: #1

hcs

Junior Member

Posts: 1
Joined: Mar 2019
Reputation: 0

[TG11] ES128 will not accept LH3 software

Hi!
Have an es128, downloaded LH3 firmvare and as textile in unzipped files describes the two iso files should be placed on two separate sd cards.
Follows the instructions and plotter reboots and start loading different base maps. After a while plotter starts up with LH2...
Any tips on this?
Radar is in in stb modus.
//Haakon.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] ES128 will not accept LH3 software - hcs - 05-17-20 01:55 AM

RE: [TG11] ES128 will not accept LH3 software - Tom - Raymarine - Moderator - 05-20-20, 01:53 AM

User(s) browsing this thread: 1 Guest(s)