The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network
05-18-20, 01:17 PM (This post was last modified: 05-20-20 02:29 AM by Tom - Raymarine - Moderator.)
Post: #1
wouterverhulst Offline
Junior Member
**
 		Posts: 6
Joined: Sep 2019
Reputation: 0
[TG11] Connecting spx/st 60 network to a st290 ST2 network
Good evening,

I have a good functioning spx/st60 seatalk 1 network and i wanted
to expand with a st290 wind set.

I connected the end of my old network , a st60+ tri with depth en speed, to
the st290 wind, st290 CH wind, and completed it with a connection to
the DPU. Result: seatalk failure, but power on all displays...also the st290 wind.

Then, i connected the DPU to the st290 data display, the windpod, st60cable and windmeter. Result: no winddata on the displays.

Please see my attachement. What went wrong? Thank you in advance.
Wouter


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-18-20 01:17 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication