[DG] [DG11] Mast Rotation Transmitter Problems

[Derek - Raymarine - Moderator]

Hi stiletto27cat

Thankyou for your enquiry

Calibration
To ensure accuracy, the transmitter must be calibrated:
1. Fix the mast on the fore and aft axis of the boat.
2. When in clear open water, select the compass setup page on a
Micronet display (refer to the setup section of the user guide for
your display). Make a note of the deviation displayed.
3. Carry out a deviation correction turn as described in the user guide.
4. Check the deviation displayed. If it has changed by more than 1º
from the value noted, note the new deviation and repeat the turns.
5. If the deviation displayed has remained stable, your system is
correctly calibrated. Exit setup on the Micronet display, and unlock
the mast from the fore and aft position

I hope this assists?
Regards
Derek