[TG11] Connecting spx/st 60 network to a st290 ST2 network

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network

05-20-20, 07:33 PM

Post: #5

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network

Hello Wouter,

If the DPU's Seatalk1 has indeed failed then that may be your only real option to get them connected. NMEA183's main problem is not that it's slow, but that it can cause problems (data loops) if you connect bi-directionally. If you only need to get heading and rudder from the SPX to the ST290 OR wind from the ST290 to the SPX then 0183 should do that fine - but you should avoid trying to connect in both directions. What can happen there is that the same data gets (re)transmitted by each device and you end up with stale data cycling round in a loop.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-18-20, 01:17 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-20-20, 02:40 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-20-20, 10:23 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-20-20, 10:53 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-20-20 07:33 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-21-20, 02:01 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-21-20, 11:57 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - JPenny1961 - 05-24-20, 01:56 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-26-20, 10:32 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - JPenny1961 - 05-30-20, 03:54 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-31-20, 10:54 PM

User(s) browsing this thread: 4 Guest(s)