Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network
05-21-20, 02:01 AM
Post: #6
RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network
Thanks for explaining the possibility.

The ST1 dpu entry is working, because the wind is also displayed on
the st1 wind displays.

But anyway, it works now. I will only use the spx, in 1 way to the dpu. Thats fine.
But, based on your post, the c90w has also a nmea0183 out.....so can i do the same
with the c90w. Connecting the datacable with nmea0183, to the dpu.

So i also will get
COG
SOG

Maybe i can choose between connecting the c99w OR/END spx5. What is best?

Regards

Wouter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-21-20 02:01 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)