[TG11] Connecting spx/st 60 network to a st290 ST2 network

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Connecting spx/st 60 network to a st290 ST2 network

05-24-20, 01:56 AM

Post: #8

JPenny1961 Offline

Junior Member

Posts: 9
Joined: Dec 2018
Reputation: 0

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network

Hi Tom,

I've been following this thread with interest,I hope you dont mind me jumping in with a query?

Is the ST1 connection on the ST290 DPU bi-directional, if so what is the extent of the information it can feed to the ST290 DPU, and would it feed in Wind & STW information that the ST290 needs for its calculations?

In this case:

ITC5 (Wind) & A22111 (Smart Triducer) => STng Network => E22158 (Stng to ST1 Converter) => (power isolated) => ST1 Network (ST2 Wind & CHW Instruments) =>(power isolated) => ST290 DPU => Graphic & Maxi Displays

Thanks

JP

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-18-20, 01:17 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-20-20, 02:40 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-20-20, 10:23 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-20-20, 10:53 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-20-20, 07:33 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - wouterverhulst - 05-21-20, 02:01 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-21-20, 11:57 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - JPenny1961 - 05-24-20 01:56 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-26-20, 10:32 PM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - JPenny1961 - 05-30-20, 03:54 AM

RE: [TG11] Connecting spx/st 60 network to a st290 ST2 network - Tom - Raymarine - Moderator - 05-31-20, 10:54 PM

User(s) browsing this thread: 3 Guest(s)