The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / HEADING SENSOR TO a128

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HEADING SENSOR TO a128
07-18-16, 07:21 AM
Post: #1
Tidetim Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2016
Reputation: 0
HEADING SENSOR TO a128
Purchased an a128 with Quantum radar. In order to be able to use MARPA and have accurate radar overlay, also purchased an AIRMAR H2183 Heading Sensor. Tried hooking it up, no luck. Setup function on a128 (System Settings, Data Sources, Heading) shows no info. Appear to have good 12v power to hdg sensor (>13vdc). I attached the White and Blue NMEA wires from heading sensor to the White and Green NMEA wires on the main power/video/NMEA cable on the a128 MFD. Not sure if I'm using correct NMEA wires from the heading sensor. Does anyone know if the a128 has a RS422 or RS232 interface?

Thanks in advance! Stymied here in Va.

Tim Leighton
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HEADING SENSOR TO a128 - Tidetim - 07-18-16 07:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication