The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / ECI 100 and Honda BF250

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ECI 100 and Honda BF250
03-03-16, 07:24 AM
Post: #1
kstolting Offline
Junior Member
**
 		Posts: 4
Joined: Mar 2016
Reputation: 0
ECI 100 and Honda BF250
I installed the ECI-100 to my system which includes 2 e127 and 1 e125 MFDs and a 2014 Honda BF250 Outboard. The LEDs flash green every 15 secs, per the manual on both the NMEA and SeaTalkNG sides of the interface. I am not able to get any ECI 100 specific data to show on the Data page. I know the engine is outputting data as I have the Honda NMEA gauge set and they work fine. I called Tech Support and their response was that the BF250 wasn't supported; with models only going to 225 HP shown. Is this true? If so, can the software be updated to include this very popular engine?

Thanks

Ken Stolting
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ECI 100 and Honda BF250 - kstolting - 03-03-16 07:24 AM
RE: ECI 100 and Honda BF250 - kstolting - 03-05-16, 07:39 AM
RE: ECI 100 and Honda BF250 - kstolting - 03-11-16, 01:56 PM
RE: ECI 100 and Honda BF250 - kstolting - 03-11-16, 02:58 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication