The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Saving Default Power Up Settings on e97 with V17 S/W

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Saving Default Power Up Settings on e97 with V17 S/W
08-04-16, 11:46 AM
Post: #1
Bill Kneller Offline
Junior Member
**
 		Posts: 17
Joined: Feb 2016
Reputation: 0
Saving Default Power Up Settings on e97 with V17 S/W
I have both e97 and e125 displays that are connected via Seatalk HS (Ethernet). They share data and displays very well. I have groups of waypoints defined (e.g. Racing, Cruising, etc.) that I am able to select on both displays. The e125 will remember the setting when it is powered off and restarted so the last group(s) I showed before power down are displayed and the others are hidden. The e97 defaults to showing all groups of waypoints when powered down and restarted.

This happens no matter which MFD I select as the data master. How do I force the e97 to remember the waypoint group that was enabled at power down?
Bill Kneller
Vento Solare, J/109 #266
Find all posts by this user
Thread Closed 


Messages In This Thread
Saving Default Power Up Settings on e97 with V17 S/W - Bill Kneller - 08-04-16 11:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication