Raystar 130 not recognized

[tonyiiiafl]

(08-17-16 12:49 PM)Chuck - Raymarine - Moderator Wrote:  Tony,

Per the referenced FAQ, should the system not feature a powered and properly terminated SeaTalkng backbone, then one will need to be created using the parts specified within the referenced FAQ. The Raystar 130 GPS Sensor's cable will be plugged into one of the spur sockets of the referenced SeaTalkng 5-Way Connector and a SeaTalkng Spur Cable (such as the A06040 part number you have referenced) may be used to connect the e97 MFD's SeaTalkng spur socket to the SeaTalkng 5-Way Connector.

BRAVO!