The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Wheel drive clutch releasing

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wheel drive clutch releasing
08-23-16, 10:16 AM (This post was last modified: 01-10-17 04:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Wheel drive clutch releasing
Wheel drive clutch releasing

Wheel Drive belt will stretch over time. Accordingly, the the Wheel Drive is designed to remove drive belt slack associated with a such drive belt stretching. The the following procedure may be used to adjust the drive belt tension:

1) the vessel should be located dockside, on the mooring, or at anchor
2) on the back side of the drive loosen the belt tensioner's allen head locking bolt enough that the square belt tension knob may be rotated
3) tighten the square belt tension knob until the tension begins to be felt half way through the rotation of the clutch lever's range of motion
4) tighten the belt tensioner's allen head locking bolt

RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Wheel drive clutch releasing - Chuck - Raymarine - Moderator - 08-23-16 10:16 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication