The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / DST-800 Installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DST-800 Installation
03-08-16, 08:54 AM
Post: #1
stephenvnoe Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2016
Reputation: 0
DST-800 Installation
Having problems getting a dst800 to seat in the thru hull with valve included with the transducer.

I am using yellow o-ring but transducer is very difficult to tighten and will not seat to the bottom of the thru hull. It appears to be about 1/4 to 3/8" from seating flush with the external surface of the thru hull.

Is there some trick to seating the yellow o-ring in the insert that would fix this?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DST-800 Installation - stephenvnoe - 03-08-16 08:54 AM
RE: DST-800 Installation - stephenvnoe - 03-08-16, 10:34 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication