Raymarine forum / Raymarine Forums / Multifunction Displays v / Interfacing TackTick Instruments with MFD a97

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing TackTick Instruments with MFD a97
08-30-16, 11:20 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Interfacing TackTick Instruments with MFD a97
nvallettejr12,

The NMEA 0183 OUT terminals of the TackTick Wireless Interface may be interfaced the NMEA 0183 IN2 leads found on the MFD's Power/NMEA 0183/Video Input Cable. The MFD's NMEA 0183 Port 2 would need to be configured to "NMEA 4800". No other settings need be configured.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfacing TackTick Instruments with MFD a97 - Chuck - Raymarine - Moderator - 08-30-16 11:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication