Raymarine forum / Raymarine Forums / Product Selection Assistance v / Does A68 require a CP100 so downvison sonar will work?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does A68 require a CP100 so downvison sonar will work?
08-31-16, 01:35 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Does A68 require a CP100 so downvison sonar will work?
firstlight38,

Unfortunately, Raymarine does not offer a thru-hull transducer supporting DownVision for hulls having a deadrise greater than 25 degrees. The only way that a thru-hull could be installed would be to fabricate a custom pocket in the keel to accommodate installation of the following transducers such that the face of the transducer would be flush with the hull:
- A80277 CPT-110 (Plastic)
- A80350 CPT-120 (Bronze)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Does A68 require a CP100 so downvison sonar will work? - Chuck - Raymarine - Moderator - 08-31-16 01:35 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication