DS600X change out to es MFD

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

DS600X change out to es MFD

09-13-16, 11:45 AM

Post: #4

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: DS600X change out to es MFD

Dave,

You are correct. The DS600X transducer can neither be mated to a eSx8 MFD nor to a CP470. Should you not be installing a eSx7 or a CP370, then it will be necessary to installed a transducer which is designed for use with the CP470.

« Next Oldest | Next Newest »

Messages In This Thread

DS600X change out to es MFD - davej - 09-13-16, 07:41 AM

RE: DS600X change out to es MFD - Chuck - Raymarine - Moderator - 09-13-16, 09:36 AM

RE: DS600X change out to es MFD - davej - 09-13-16, 10:54 AM

RE: DS600X change out to es MFD - Chuck - Raymarine - Moderator - 09-13-16 11:45 AM

RE: DS600X change out to es MFD - davej - 11-02-16, 09:13 PM

RE: DS600X change out to es MFD - davej - 11-03-16, 12:03 PM

RE: DS600X change out to es MFD - Chuck - Raymarine - Moderator - 11-03-16, 08:48 AM

RE: DS600X change out to es MFD - Chuck - Raymarine - Moderator - 11-03-16, 01:39 PM

User(s) browsing this thread: 5 Guest(s)