Raymarine forum / Raymarine Forums / Marine Cameras v / can220 ip installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
can220 ip installation
09-13-16, 12:17 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: can220 ip installation
Welcome to the Raymarine Forum Goodwood Marine,

It is recommended that shielded marine grade CAT6 cable (tinned stranded) such as Raymarine's R32140 RJ45 to RJ45 Patch Cable (includes power leads) be used between a POE injector/port and any of the following:
- CAM210
- CAM220
- CAM200IP
- T200 Thermal Camera (all versions)
- FLIR MD Series Thermal Camera
- FLIR or Raymarine branded Thermal Camera JCU

The distance which you have specified is well within the maximum recommended distance between Ethernet/POE terminals.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: can220 ip installation - Chuck - Raymarine - Moderator - 09-13-16 12:17 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication