Raymarine forum / Raymarine Forums / Networking / System Integration v / Upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade
11-16-16, 04:42 PM
Post: #5
mpo881 Offline
Junior Member
**
 		Posts: 15
Joined: Feb 2016
Reputation: 0
RE: Upgrade
Chuck,
I did of course only attach the one drawing showing the EV-1 Sensor core and am glad that you have confirmed it as correct. Relating back to the SHS....Looking in the a Series/ c Series / e Series Installation instructions, page 39 section 4.5 it shows item 8 as being the NMEA 0183 data cables. So, assuming that the E97 comes with the combined power and data cable (I have no clue?) how is the connection made from the MFD to the SHS? The cable from the MFD shows 6 wires. For the short term at least, if I can get by using the SHS, I can save a few bucks on the total cost of my upgrade.
Thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Upgrade - mpo881 - 11-15-16, 03:21 PM
RE: Upgrade - mpo881 - 11-16-16, 09:38 AM
RE: Upgrade - mpo881 - 11-16-16 04:42 PM
RE: Upgrade - mpo881 - 02-16-17, 06:24 PM
RE: Upgrade - mpo881 - 02-20-17, 07:10 PM
RE: Upgrade - mpo881 - 02-21-17, 03:24 PM
RE: Upgrade - mpo881 - 02-27-17, 03:40 PM
RE: Upgrade - mpo881 - 04-01-17, 09:02 AM
RE: Upgrade - mpo881 - 04-03-17, 02:20 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication